Skip to product information
  • Sku: 6103
  • Vendor: Ulster Ceramics Pottery Supplies

3″ Horizontal Pugmill

In stock!

Product description

Code 6103

L 800 x W 280 x H 5000mm

Weight: 78kg

Output 3000kg per hour

0.75Kw (1 Hp) reduction drive gearbox direct drive 230/ 400v

Same compact design as 6101 but has larger 150 mm barrel with a 75mm outlet. Suitable for a small studio or classroom environment. Greater output than the 6101 due to its larger hopper making it easier to use. 6″ aluminium body, 3” (75mm) extrusion. Split body and nose cone to facilitate easy cleaning, Individual aluminium blades mounted on a hexagonal steel shaft, Geared motor reduction drive – single or three phase.

Fitted with a hopper safety grid and thermal overload safety switch as standard.

Pugmills are an important item of equipment in any pottery or studio. Provided that the clay is not too dry, putting it through a pugmill will reconstitute it. Thus the clay can be reclaimed and used again. The pugmill can also be used within reasonable limits for incorporating such materials as sand or grog etc into the clay body. If the pugmill is used fairly frequently and the hopper and outlet nose cone sealed, when not in use, no appreciable drying of the clay will occur and it will not be necessary to clean the pugmill. However, if the pugmill is used infrequently it should be cleaned after use. Under no circumstances should the pugmill be used with dry clay still in its body.

View full details

3″ Horizontal Pugmill


Recently viewed products